|
|
|
|
|
|
|
| Dimension
: 140
x 150 x 86mm |
|
Application
: For PC
|
| Watt
: 350 |
| PFC
: Passive |
| Features |
- High
efficiency over 70%
- Over-voltage
protection
- Over-current
protection
- Short-circuit
protection
- Approved
by UL, CSA, TUV, NEMKO, CB & FCC
-
Internal 12 cm fan
- MTBF:
100K hours at 25oC
|
|
|
Safety
Environmental
- MTBF:
100K hours at 25oC
- Efficiency:
70% min.
- Hold-up
time: 12.0ms minimum at 230V/50Hz.
- Operating
conditions: ambient temperature 0oC~50oC,
90% RH
- Storage
and shipping conditions: ambient temperature -20oC~65oC,
95% RH
- Dielectric
strength: primary to frame ground 1800 VAC for 1 second,
primary to secondary 1800 VAC for 1 second
Electrical
Specification
|
| Input:
|
-
Voltage: 220-240VAC
-
Frequency: 47 Hz to 63 Hz
- Input
current: 4 amps maximum / 230 Vrms, 50Hz
|
| Output:
Max. 350W. |
- Over-voltage
protection:
+3.3V (4.6V max.), +5V (6.5V max.), 12V1 (15.5V max.),
12V2 (15.5V max.)
- Over-current
protection:
+3.3V (75.0A max.), +5V (56.0A max.), +12V1 (25.0A
max.), +12V2 (30.0A max.)
- Short
circuit protection:
The power supply is prevented from output over current.
- Remote
ON/OFF control:
The power supply shall accept a logic open collector
level which will disable /
enable all output voltage (excluding +5V standby).
- Power
good signal:
230V (full load) 100 - 500 ms
|
|
|
Voltage
|
Min.
Load
|
Max.
Load
|
Load
Regulation
|
Ripple
& Noise
|
|
+3.3V
|
0.5A
|
22.0A
|
±
5%
|
50mVp-p
|
|
+5V
|
1.0A
|
22.0A
|
±
5%
|
50mVp-p
|
|
+12V1
|
1.0A
|
18.0A
|
±
5%
|
120mVp-p
|
|
+12V2
|
1.0A
|
16.0A
|
±
5%
|
120mVp-p
|
|
-12V
|
0A
|
0.3A
|
±
10%
|
120mVp-p
|
|
+5Vsb
|
0A
|
2.0A
|
±
5%
|
50mVp-p
|
|
|
Remarks:
* +3.3V&+5V total output shall not exceed 130 Watts.
* +12V1&+12V2 total output shall not exceed 300 Watts.
|
|
The
description stated herein is subject to change without prior notice.
Latest :
September 28, 2005
|
|
