|
|
|
|
|
|
|
| Dimension
: 140
x 150 x 86mm |
|
Application
: For PC
|
| Watt
: 400 |
| PFC
: Passive (optional) |
| Features |
- High
efficiency
- Low
ripple & noise
- Output
over voltage protection
- Short
circuit protection on all outputs
- Safety
approved: UL, CSA, TUV, NEMKO, CCC, CE, CB
- 100%
burn-in under high ambient temperature (50¢XC)
- Vacuum-impregnated
transformer
- MTBF:
100K hours at 25oC
- 100%
Hi-pot tested
- Line
input fuse protection
- With
12cm big fan
|
|
|
Safety
Environmental
- MTBF:
100K hours at 25oC
- Efficiency:
70% min.
- Hold-up
time: 12.0ms minimum at 230V/50Hz.
- Operating
conditions: ambient temperature 0oC~50oC,
90% RH
- Storage
and shipping conditions: ambient temperature -20oC~65oC,
95% RH
- Dielectric
strength: primary to frame ground 1800 VAC for 1 second,
primary to secondary 1800 VAC for 1 second
Electrical
Specification
|
| Input:
|
-
Voltage: 220-240VAC
-
Frequency: 47 Hz to 53 Hz
- Input
current: 5 amps maximum / 230 Vrms, 50 Hz
|
| Output:
Max. 400W. |
- Over-voltage
protection: +3.3V, +5V,+12V1, 12V2
- Over-current
protection: +3.3V, +5V,+12V1, 12V2
- Short
circuit protection: The power supply is prevented
from output over current.
- Remote
ON/OFF control: The power supply shall accept a logic
open collector level which will disable / enable all
output voltage (excluding +5V standby).
-
Power good signal: 230V (full load) 100-500 ms
|
|
|
Voltage
|
Min.
Load
|
Max.
Load
|
Load
Regulation
|
Ripple
& Noise
|
|
+3.3V
|
0.5A
|
30.0A
|
±
5%
|
50mVp-p
|
|
+5V
|
0.3A
|
28.0A
|
±
5%
|
50mVp-p
|
|
+12V1
|
1.0A
|
18.0A
|
±
5%
|
120mVp-p
|
|
+12V2
|
1.0A
|
18.0A
|
±
5%
|
120mVp-p
|
|
-12V
|
0A
|
0.5A
|
±
5%
|
120mVp-p
|
|
+5Vsb
|
0A
|
2.0A
|
±
5%
|
50mVp-p
|
|
|
Remarks:
* The total output for +5V and +3.3V is limited to under 150W.
* The total output of +121, +12V2, +5V is limited to 348W.
|
|
The
description stated herein is subject to change without prior notice.
Latest :
February 15, 2006
|
|
